How To Use Momcozy V1 Pro

Want to learn how to use the Momcozy V1 Pro breast pump? Then my step-by-step guide on how to use Momcozy V1 Pro is your go-to for mastering the V1 Pro features quickly and easily.

Here you’ll learn how to assemble your Momcozy V1 Pro, navigate its settings, and get the most out of your V1 Pro pumping experience!

• If you prefer to watch your how to guides, there’s a video how to guide right below. Then, you can skim the written guide for more details.
• If you prefer to read your how to guides, scroll past the video, and you’ll find my written guide.

Editor’s note: Pumping Milk is reader-supported, meaning, at no cost to you, I may earn a commission if you buy after clicking an affiliate link. Learn More.

Momcozy V1 Pro Inclusions

Whether you’ve brought your Momcozy V1 Pro new or second hand, I always recommend that you check to see that all the parts are there, so you have everything you need to get pumping.

When you purchase a Momcozy V1 Pro breast pump, included in your kit is:

Momcozy V1 Pro Pump Kit Inclusions:

• Pump Motor * 1
• Milk Collector * 2
• Tubing * 2
• Duckbill Valves * 4
• Flange Insert 17mm * 2
• Flange Insert 19mm * 2
• Flange Insert 21mm * 2
• 24mm Flange * 2
• USB Type-C Cable * 1
• Flange Cover * 2
• Flange Size Ruler * 2
• User Manual * 1

If you find anything missing or damaged, don’t hesitate to reach out to Momcozy’s customer support for assistance.

If you’re using a second-hand Momcozy V1 Pro pump I also recommend replacing items like valves, flanges, and any compatible flange inserts.

While getting new valves and flanges may add a bit to your budget, it’s key for keeping your pump clean and efficient for each session.

Also, be sure you have the correct flange size that fits your nipple size, as this can impact comfort and milk flow. The flange size on the Momcozy V1 Pro is 24mm and your kit comes with 17mm, 19mm, and 21mm flange inserts. If these are not the correct size, you will need to purchase the larger flange or smaller flange inserts separately.

Momcozy V1 Pro Components

One thing I love about the Momcozy V1 Pro is there are very minimal parts. Here’s a quick rundown:

Pump Motor: The compact and powerful motor is what creates and drives your suction. It also comes with your control panel and LED screen built into the top part of the pump.

Teardrop-Shaped Collection Cup: These are the containers that collect the expressed breast milk. They can hold over 7oz of breast milk.

On the Momcozy V1 Pro, the collection cup also comes with an attached diaphragm (not removable). These are also the same collection cups for the Momcozy V2 Pro.

Tubing: There are two different tubing options included with the Momcozy V1 Pro: single and double. Both have the collection cup and motor connectors attached to connect your pump motor and collection cups together.

Silicone Flange: This is the funnel-shaped part that fits over your breast. It comes in a 24mm flange tunnel size. There are additional flange inserts available in 17mm, 19mm, and 21mm sizes to reduce the flange tunnel size for smaller nipples. Choosing the right flange size is essential for comfort and effective milk extraction.

On the Momcozy V1 Pro, the flange also comes with an attached linker.

Valve: The valve controls milk flow into the collection cup, preventing backflow and keeping milk separate from the motor.

Charging Cable: The pump includes a USB-C charging cable to recharge the motor, making it portable and convenient to use on the go.

Assembly

The good news is that the Momcozy V1 Pro is nice and straightforward to assemble and the more you do it, the easier it becomes.

Here’s a step-by-step guide to help you reassemble your Momcozy V1 Pro:

Step 1

Before assembling your pump make sure that you have sterilized all the parts that come in contact with breast milk. This is the collection cups, valves, flange, and flange inserts.

You will also need to wash your hands thoroughly with soap and water before handling any of the sterilized components.

Step 2

Attach the silicone duckbill valve to the base of the connector. Push firmly to ensure that it is secure.

Step 3

Connect the flange with the main body of the collection cup.

There is a silicone tab at the top of the flange that needs to align with the pouring spout on the collection cup.

Once you have the correct alignment, firmly press the flange and collection cup together.

I also like to ensure a good seal by pressing my thumbs around the rim.

Step 4

Press the silicone pouring spout cap into the pouring spout. Ensure that it is firmly in place.

Step 5

Connect your tubing to the collection cup.

You have the choice between single and double pumping, so choose your tubing accordingly. For single pumping, the tubing comes with a single connector. For double pumping, the tubing comes with dual connections split by a white Y-shaped connector.

On the round tubing connector, you will see a grey dot that indicates the top of the connector. Once aligned, simply press the connector into the collection cup opening located on top of the diaphragm. You will hear it ‘click’ into place.

Repeat for the second collection cup if double pumping.

Step 6

Connect your tubing to the pump motor but pushing the white tubing connector into the hole located at the bottom of your pump motor.

Step 7

Turn on the Momcozy V1 Pro breast pump by pressing the power button. You will see the LCD screen light up.

Now, your V1 Pro pump is ready for use, but first make sure to familiarize yourself with the pump’s controls, including the suction level and mode settings.

Buttons and LED Screen

The Momcozy V1 Pro’s button layout and LED screen make it easy to customize and monitor your pumping sessions. Here’s a breakdown of the buttons and features you’ll find on the V1 Pro:

Power (On/Off) Button

This button turns the pump on or off. Hold it for a few seconds to power up the device, and it will automatically start in the last used settings. This makes it easy to get started quickly.

Modes Button

There are three pumping modes on the Momcozy V1 Pro:

1. Stimulation mode for stimulating letdown
2. Expression mode for efficient milk removal
3. Mixed mode which is a combination of the shorter stimulation suctions and longer expression suctions.

The LCD screen will indicate the current mode.

The heart symbol represents the stimulation mode, the droplet symbol represents the expression mode. When both symbols are visible then the pump is in the mixed mode.

You can switch between the three modes with the circular arrow button.

Cycle Selection Button

Represented by a wavey line on the right side of your controller, this button lets you adjust the cycle speed, allowing you to fine-tune the rhythm of the pump.

There are 3 cycles to choose from: low, medium, and high.

Pause/Continue Button

This button lets you pause the pumping session if you need a break. Simply press the button to pause and press again to continue from where you left off.

Suction Level Buttons

There are 15 suction levels to choose from on the Momcozy V1 Pro. To adjust the vacuum strength, you can press the + button to increase the suction level and the – button to decrease it.

The level you are on will be displayed by a number on the screen.

Timer

The timer on the Momcozy V1 Pro is adjustable! This means you can preset it to count down from various times from 5 minutes to 30 minutes. Once the countdown has finished your pump will automatically switch off.

To set the timer press the timer button, then the + button to increase the time and the – button to decrease it.

The time remaining will also be shown on the LED display. Next to the battery level.

Battery Status

The battery level is displayed on the right-hand side of the LED screen. The 3 bars represent a full battery while the single bar is a low battery.

Error Messages

The LED screen may display error messages if there are any issues with the pump, such as a blocked tube or low battery.

Suction Settings

The Momcozy V1 Pro offers an impressive range of customizable suction settings from the 15 suction levels to three distinct modes to the adjustable cycle frequency. But which setting should you choose?

Let’s start with the pumping modes!

There are the 3 pumping mode on the V1 Pro:

1. Stimulation Mode: This mode is designed to kick-start your milk flow at the beginning of each session. It features quicker, lighter suction patterns to stimulate letdown, preparing you for the main part of your pumping. Run this for around 2 minutes or until your letdown kicks in.
2. Expression Mode: After your let down has initial you can choose between the expression mode and mixed mode. The expression mode is a slower, more rhythmic suction pattern, which mimics your baby’s natural sucking to help fully empty the breast.
3. Mixed Mode: This unique mode combines aspects of both stimulation and expression modes, alternating between faster and slower suction to enhance milk flow. Mixed Mode is ideal for moms who prefer an extra boost in their sessions or those experiencing difficulties with milk flow.

During any of the three modes, you can adjust the suction strength through 15 different levels from a gentle pull to a more intense suction. This allows you to tailor the intensity to suit your comfort and milk flow needs.

I recommend starting with a lower suction level and gradually increasing until you find the right balance that’s both effective and comfortable. Keep in mind that the highest setting isn’t always the most productive; finding a level that feels right for you is key to a more enjoyable and efficient pumping experience.

Finally, you have the adjustable cycle frequency levels, which allows you to control the speed of the suction cycles during each mode. This customization helps you create a pumping experience that closely resembles your baby’s natural rhythm, making each session more comfortable and efficient.

What Is Cycle Frequency?

Cycle frequency refers to how quickly the pump cycles between suction and release. Some moms prefer a quicker rhythm, especially during the initial letdown phase, while others find a slower, steady rhythm more effective for milk expression.

How to Use the Adjustable Cycle Frequency

With the V1 Pro, you can change the cycle frequency to match your needs via 3 different cycle settings. Each mode whether that’s a faster frequency for stimulation or a slower one for expression.

I suggest experimenting with different cycle speeds alongside the suction levels to find a combination that’s comfortable and efficient. Adjusting the frequency along with the suction allows you to fine-tune your settings to enhance both comfort and milk flow.

Using the Momcozy V1 Pro

Now you’re familiar with all the buttons and settings getting started with your Momcozy V1 Pro pretty simpe.

Here are the steps to follow when using the Momcozy V1 Pro:

Step 1

Wash Your Hands: Start by washing your hands thoroughly with soap and water to maintain cleanliness.

Step 2

Assemble the Pump: Make sure all pump parts are sterilized and properly assembled. This ensures everything is ready for a safe and hygienic pumping session.

Step 3

Position the Flanges: Place the flange over your breasts, centering your nipple so it can move comfortably within the shield. Press gently to create a light seal.

Use a flange insert if required.

Step 4

Secure in Your Bra: Since the V1 Pro is a hands-free, wearable pump, position it snugly in a well-fitted, stretchy bra. This will keep the pump secure without being too tight or too loose.

Step 5

Power On the Pump: Press the power button on the V1 Pro to turn it on. You’ll see the LED screen light up, displaying the current settings and battery level.

Step 6

Select Mode and Adjust Suction Level: Choose your preferred pumping mode to start.

• Begin with stimulation mode to stimulate milk letdown.
• Once milk starts flowing, switch to expression or mixed mode for effective milk removal.

Adjust the suction level within each mode to find your comfort zone. I suggest starting at a lower suction level and increasing gradually to avoid discomfort.

Step 7

Adjust Cycle Frequency: Adjust the cycle frequency to find the rhythm that best suits your body. This will help create a more natural pumping experience, enhancing comfort and milk flow.

Step 8

Set your timer: If you know how long you want or need to pump, set your timer so it can countdown and switch off automatically for you once your session is complete.

Step 9

Monitor Milk Flow: Keep an eye on your milk flow throughout your session. If you notice any drop in suction or shield movement, pause to adjust for a secure fit.

Step 10

Turn Off the Pump: When you’re done, press the power button to turn off the pump. Don’t worry if you forget; it has a 30-minute auto shut-off feature.

Step 11

Remove the Pump: Gently break the seal between the shield and your breast with your fingers, and lean forward as you remove the pump to avoid spilling.

Step 12

Transfer Milk to Storage: Detach the motor and carefully pour the milk into a storage container for proper breast milk storage. The V1 Pro’s collection cup has a convenient pour spout, making this step easy.

Make sure you remove the silicone lid from the pouring spout before pouring.

Step 13

Clean the Pump: Clean all parts that come into contact with milk to keep your pump in excellent condition.

Step 14

Check Battery Life: After your session, check the battery level and recharge if needed to ensure it’s ready for your next use.

Step 15

Store Safely: Once everything is cleaned and dried, store your pump in a secure spot until your next session.

Momcozy V1 Pro Replacement Parts

Over time, some parts of your Momcozy V1 Pro breast pump may require replacement to keep it running smoothly and effectively.

If you’re noticing reduced suction or a drop in milk output, it’s a good idea to check your pump’s parts for any wear, damage, or stretching particularly in the silicone components.

Momcozy suggests replacing silicone parts, like valves and diaphragms, every 1-3 months, depending on how often you use the pump. Other components should be replaced as needed based on visible wear.

Here’s a list of available replacement parts for the Momcozy V1 Pro:

• Duckbill Valves
• Flange Insert 15mm
• Flange Insert 17mm
• Flange Insert 19mm
• Flange Insert 21mm
• Direct To Bag Collection Cups
• Screw-on Breastmilk Storage Bags

Regularly checking and replacing these parts will help maintain both the pump’s performance and your comfort. You can learn more in my guide on how often should you replace breast pump parts!

Troubleshooting Common Issues with the Momcozy V1 Pro

Here are some common troubleshooting issues with the Momcozy V1 Pro breast pump, along with quick solutions to keep it running smoothly:

1. Loss of Suction

• Cause: Often, low suction is due to loose or worn-out parts, such as valves, diaphragms, or improperly assembled flanges.
• Solution: Ensure all parts are assembled tightly and check for wear on the silicone parts. Replace worn components as needed, especially valves and diaphragms, as these are critical to maintaining suction.

2. Pump Won’t Turn On

• Cause: This could be due to a low or dead battery, or an issue with the charging cable.
• Solution: Charge the pump fully, ensuring the power connection is secure. If it still won’t turn on, inspect the charging cable and port for damage. You may need to replace the cable if it’s not charging effectively.

3. Milk Leakage

• Cause: Leaks are often due to an improperly placed flange, overfilled collection cups, unsecured pouring spout lid, or incorrect positioning.
• Solution: Make sure the flange is securely centred over your nipple to create a strong seal. Avoid filling the collection cups beyond the recommended level, and tilt forward slightly when removing the pump to prevent spillage.

4. Noisy Pump Operation

• Cause: Unusual noises could indicate misaligned parts or a blockage.
• Solution: Disassemble the pump, clean all parts, and reassemble them carefully to ensure they fit properly. Confirm that no milk or debris is obstructing any valves or tubing.

5. Discomfort During Pumping

• Cause: Discomfort can result from the wrong flange size or a suction level that’s too high.
• Solution: Use the flange size that best fits your nipple to avoid pinching or discomfort. Start at a lower suction level and gradually increase it to find a comfortable setting that works for you.

6. Pump Shuts Off Unexpectedly

• Cause: The V1 Pro has an automatic shut-off feature after 30 minutes or as set with your timer, but sudden shutdowns can also occur if the battery is low or there’s a connectivity issue with parts.
• Solution: Check the battery level and ensure all parts are securely assembled. If the issue persists, contact Momcozy’s customer support for further assistance.

7. Reduced Milk Flow

• Cause: Reduced milk flow can be due to low suction, improper settings, or stress.
• Solution: Make sure all parts are clean and undamaged, adjust the settings to a more comfortable level, and try relaxing techniques before pumping to improve letdown. Using the massage mode at the beginning of your session can also help stimulate milk flow.

Keeping your pump clean, using the correct flange size, and regularly checking parts for wear can help minimize issues and maintain the V1 Pro’s effectiveness.

Final Thoughts on Using the Momcozy V1 Pro

Once you get the hang of it, I think using the Momcozy V1 Pro breast pump is straightforward. The trick is familiarizing yourself with the assembly, settings, and maintenance, you can ensure smooth and successful pumping sessions every time.

Don’t be afraid to adjust your settings to find a setting that best suits your needs. Remember too, that your most suitable settings may also change over time.

Keep your pump clean by regularly washing and sterilizing all parts that come into contact with breast milk. This is essential for both hygiene and pump performance.

And finally, don’t forget to pay attention to wear and tear on parts like the valves, diaphragms, and flanges. Replacing these parts as needed will help maintain strong suction and comfortable use.